2.5 Wiring
2-9
Preparation
■
Installation
procedure
●
Installation of DIN rail
When installing Model KM1, use the DIN rail or screws.
When using the DIN rail, fix it with three or more screws within the control panel.
x
Recommended DIN rail
Model
Dimensions Manufacturer
Model PFP-100N
1,000 mm
Model PFP-50N
500 mm
OMRON
x
End plate Model PFP-M (2 pieces)
x
Installation direction
The installation direction of Model KM1 has been determined. As shown below, place the
DIN rail vertical to the ground and install it in the horizontal direction.
Vertical:
{
Horizontal:
×
Lateral: O
Longitudinal: X