13
(14)
From the Motor condition monitoring Tool, select the network card to be used for automatic connection to the K6CM
device with the Ethernet cable from the pull-down list and click the [OK] Button.
If Communications Middleware is already installed, go to step (15).
Network card configuration example
If there is only one wired LAN port of the PC and the Motor condition monitoring Tool communicates with the K6CM
device with that wired LAN port, select the following.
(If the name of the network connection has been changed, select the one with the changed name.)
Windows 7
Select "Local Area Connection".
Windows 8.1/Windows 10
Select "Ethernet".
(15) Select the PC restart and click the [Finish] Button.
Step
4
K6CM configuration in the Motor condition monitoring Tool
1
Directly connect PC and K6CM using an Ethernet cable
2
Turn ON K6CM
Motor Condition
Monitoring Tool
Ethernet cable
(Straight or cross)
EtherNet/IP port
Motor condition monitoring
equipment
K6CM device
100 to 240 VAC or
24 V power supply (by type)
