Omron K3NC, Manual

Page: 4 / 12

K3NC K3NC
4
Engineering Data
3
DERATING CURVE FOR SENSOR POWER SUPPLY
Ma
x.
cu
rr
e
n
t
(m
A)
Ambient temperature (
°
C)
Note: The derating curve shown is for standard installation.
The derating curve depends on the mounting direction.
Nomenclature
3
K3NC
1. SV Display
2. PV Display
4. SV Display Status
5. ESC Key
6. Mode Key
7. Status Indicators
8. Teaching Indicator
9. RESET/TEACH Key
10. Up Key and Shift Key
OUT5
OUT4
OUT3
OUT2
OUT1
1 2 3
4 5 OUT
3. Comparative Output
Status Indicators
Name Functions
1. SV display Displays the set value or parameter. Available for Set Value LED Models only.
2. PV display Displays the process value or parameter.
3. Comparative output
status indicators
Displays the status of comparative output.
4. SV display status Indicates which comparative set value is currently on the SV display.
5. ESC Key Used to return to the RUN mode from the Setting, Protect or Maintenance mode.
6. Mode Key Used to enter the Setting mode.
Used to allow the PV display to indicate set values sequentially. Available for Basic Models only.
Used to indicate set values sequentially on the SV display. Available for Set Value LED Models only.
7. Status indicator RESET: Lit when the RESET input is ON.
PROG: Lit or flashes while parameters are being set.
8. Teaching indicator Lit when the teaching function is enabled and flashes when the Intelligent Signal Processor is in
teaching operation.
9. RESET/TEACH Key The counting value is reset by pressing this key.
Teaching is available when the teaching function is enabled.
10. Up Key and Shift Key The digit being set is scrolled by pressing the Shift Key. The set value increases by 1 whenever the up
key is pressed.