![Omron IntelliSense HEM-907 Instruction Manual Download Page 17](http://html1.mh-extra.com/html/omron/intellisense-hem-907/intellisense-hem-907_instruction-manual_741788017.webp)
17
1. Wrap the arm cuff over the
patient’s arm.
3. Set the MODE Selector to
“AVG.”.
ON/OFF
AVG./1st/2nd/3rd
DEFLATION
START
STOP
HIDE
P-SET
100
AUTO
140
180
220
260
280
MODE
AVG.
MANU.
CHECK
SINGLE
5. Push the START Button to start
the measurement.
•
Set the unit to the start time of
the first measurement, then the
unit starts measurement auto-
matically.
•
After displaying the results of
first measurement, the unit will
measure blood pressure in the
set number of times automati-
cally by taking an interval.
•
For the setting of the number of
measurements, the waiting time
before start of measurement,
and the interval time, refer to
Page 7.
ON/OFF
AVG./1st/2nd/3rd
DEFLATION
START
STOP
HIDE
P-SET
100
AUTO
140
180
220
260
280
MODE
AVG.
MANU.
CHECK
SINGLE
7. Push the ON/OFF (power)
Button to turn off the power.
ON/OFF
AVG./1st/2nd/3rd
DEFLATION
START
STOP
HIDE
P-SET
100
AUTO
140
180
220
260
280
MODE
AVG.
MANU.
CHECK
SINGLE
2. Push the ON/OFF (power)
Button to turn on the power.
ON/OFF
AVG./1st/2nd/3rd
DEFLATION
START
STOP
HIDE
P-SET
100
AUTO
140
180
220
260
280
MODE
AVG.
MANU.
CHECK
SINGLE
4. Set the P-SET (pressure set-
ting) Volume to “AUTO” or the
target inflation value.
•
When setting the P-SET to
“AUTO”, turn the Volume coun-
terclockwise as far as it goes
until you can hear the click
sound.
•
When the systolic pressure is
expected to exceed 220 mmHg,
proper inflation may not be pos
-
sible in “AUTO” setting.
Set the target inflation value to
30 to 40 mmHg higher than the
expected systolic pressure.
ON/OFF
AVG./1st/2nd/3rd
DEFLATION
START
STOP
HIDE
P-SET
100
AUTO
140
180
220
260
280
MODE
AVG.
MANU.
CHECK
SINGLE
6. Measured results are
displayed.
•
After the measurement is
completed, average values are
displayed.
•
Each time a DEFLATION
(deflation control) Button is
pushed, the measurement
results for each time are
displayed.
HIDE
BPM
mmHg
PULSE
SYS
mmHg
DIA
How to Measure Blood Pressure
(in AVG. Mode)
To stop the measurement during the measurement:
Push the STOP Button.
To start the stopped measurement again:
Push the START Button.