Safety Information
6
Using the Device
Check the Following Components
Massaging
• Check that the cloth is not torn before use. Make sure never to use if the cloth is torn.
• Check that the switch is operating correctly and the device turns off automatically before
use. Incorrect operation might cause accident or injury.
• If the device has not been used for a long time, operate as described in the instruction
manual and check that operations are normal.
• Make sure the cover is attached during use.
Note: If an abnormality is detected, do not use the device and contact the OMRON
Customer Services for repairs. (
Back cover.)
• Main unit
• AC adapter
• Cover (attached on the main unit)
• Instruction manual
Insert the AC adapter jack into the
power connector.
Note: Securely insert to the hilt.
1
Plug the AC adapter into an electrical
outlet.
Note: Hold the AC adapter and securely insert to the hilt.
2
Press the switch to select the desired operation.
The massage balls will operate and the massage will start.
Each press of the switch changes the operation as illustrated below.
Note: Approx. 15 minutes after the massage has started, the device will stop
automatically.
Press the switch until the device turns off and finish the
massage.
(
Step
3
)
3
5
Power connector
Jack
Place the massager on the part to be massaged.
4
Unplug the AC adapter plug from the electrical outlet.
6
For calves
and thighs
For hips and back
For neck and
shoulders
AC Adapter
Power cord
Plug
Turn off the device
M Heater
Massage
