Omron HEM-637, Instruction Manual

Page: 19 / 32

19
How to Measure Blood Pressure
(This measurement example describes the situation
where the Position Sensor is set to ON and the
SIGNAL is set to ON.)
• If the date and time
is not set, the Time
Screen is displayed.
Be sure to set the date
and time before using
this monitor
Time Screen
1.
Push the START/STOP
button.
The Position Sensor Screen
is displayed.
Hold your elbow firmly to avoid body movement.
Remain still and do not talk during measurement.
2.
Adjust the height of your wrist by using your
elbow as the axis so that the
mark can
be aligned with the mark.
The wrist movement is indicated with the mark.
Slowly move your wrist up and down so that the
wrist comes to the level of your heart (
mark).
Please be careful not to raise your wrist too high.
If your wrist is raised higher than the level of your heart, the monitor will let
it know with the display of a mark.
Slowly lower your wrist so that the mark aligns with the level
of your heart (
mark) using your elbow as the axis.
When the wrist reaches the proper position, the monitor beeps
and automatically starts inflation and measurement.