Omron HEM-637, Instruction Manual

Page: 10 / 32

10
Advanced Positioning Sensor (APS) Setting
Position Sensor Screen
Position Sensor OFF Screen
Position Sensor ON
and SIGNAL ON Screen
Position Sensor ON and
SIGNAL OFF Screen
1.
Push the SET button while the power
is turned off.
Keep pressing the SET button until the
Position Sensor Screen is displayed.
2.
Select ON or OFF.
• The Position Sensor is set to ON and the
SIGNAL is set to ON (to beep) at the time
of your purchase of the monitor.
Set the (APS) function to ON or OFF and set SIGNAL of the position sensor
to ON (beeps) or OFF (does not beep).
For setting the Position Sensor to OFF
Push the button to set the Position
Sensor to OFF.
• To set it to ON after setting it OFF,
push the button.
• There is no SIGNAL setting when
the Position Sensor is set to OFF.
How to set the SIGNAL to OFF when
the Position Sensor is set to ON
Push the SET button to make
SIGNAL ON flash.
To set the monitor to SIGNAL OFF, push
the button.
3.
Lock the setting.
If you are also going to change other settings, push the SET button
to lock the setting.
• When you push the SET button, the display changes
to Measurement Screen.
If you want to finish after locking the setting, push the START/STOP
button to turn off the power
.