Omron HEM-637, Instruction Manual

Page: 17 / 32

17
How to Apply the Wrist Cuff
How to wrap the wrist cuff is one of the most important points for
correct measurement. Wrap the cuff snugly on your wrist.
• This monitor is preset to measure on your left hand when you
purchased it. If you desire to measure on your right hand, change
the mode to Right Hand measurement in setting.
• Wrap the wrist cuff over your skin.
• Please be careful not to catch the cuff of your shirt.
1.
Place the wrist cuff over your left wrist with
your left thumb facing upward.
• Cover the wrist cuff by leaving clearance
of 1/2 inch (the clearance almost equal to the
width of an index finger) between the edge
of the wrist cuff and the bottom of the palm
as shown in the Figure to the right.
Check if the wrist cuff completely covers your
wrist as shown in the Figure to the right.
How to wrap the wrist cuff correctly (on left wrist)