6
Chapter 2 Installing and Setting up the Meter
2.1 Inserting / replacing batteries
◆
When to change the batteries
When the battery sign appears on the display
,the battery power is low and replacing the batter as soon
as possible is required for the meter.
◆
There are two conditions might occur depending on
battery power status
1. When the battery sign flashes on the display after
powered on, it represent the power of the batteries
a r e l o w. H o w e v e r, y o u c a n s t i l l p e r f o r m g l u c o s e
measurements and the results will still be accurate, but
it is recommended replacing the batteries as soon as
possible.
2. The meter will shut down automatically after 120 seconds
when only battery sign flashing on the display after
powered on. It represents the battery power is too low
to perform a measurement. You have to replace the
batteries in order to continue using this meter.Time and
date is required to be reset after replacing the batteries,
however the past results is still recorded.
◆
How to replace batteries for Meter
1. Tu r n m e t e r t o t h e b a c k s i d e a n d o p e n t h e b a t t e r y
compartment.
2. Replace two new AAA batteries and please take notice of
(+) and (-) signs.
3. Install battery cover back to the battery compartment
until hearing a “click” sound.
4. Try to turn on the device to see whether the meter is
powered on. If not, please reexamine batteryies replacing
procedures.
5. After turning on the meter, it will enter into time and date
setting mode directly. (Please refer to setting up your
meter of 2.2 for relative settings.)
6. Please dispose the used batteries according to the
regulation.
OMRON blood glucose monitoring system HEA-230.indd 6
2012/6/14 上午 11:14:49