38
TROUBLESHOOTING TIPS
Problem
Cause
Correction
You want to measure your
body composition, but body
composition measurement
does not start after the weight
measurement has been
displayed.
A personal data for a Personal
Profile Number or Guest mode
measurement has not been set.
(Neither a Personal Profile
Number 1, 2, 3, 4 or Guest is
displayed.)
Enter a personal data for a
Personal Profile Number or use
Guest mode.
Refer to SETTING PERSONAL
DATA on page 20.
The Personal Profile Number
button or GUEST/
MEMO
button was not pressed correctly.
(Neither a Personal Profile
Number 1, 2, 3, 4 or Guest is
displayed.)
Make sure that Personal Profile
Number 1, 2, 3, 4 or Guest is
displayed before measurement.
Refer to HOW TO TAKE A
MEASUREMENT on page 25.
Data cannot be sent.
(Err indicator lights.)
The destination device for the
data is too far away.
After checking that there are no
sources of interference nearby,
move the device to a distance
within 5 m of the unit.
Pairing (registering) has not been
completed.
Perform pairing (registration).
Refer to REGISTERING THE
UNIT WITH THE
DESTINATION DEVICE
(PAIRING) on page 32.
The application on the connected
device is not ready.
Check the application then try
sending the data again.
If the Err indicator still lights after
checking the application, contact
the service (support) center of the
application provider.
The power is automatically
turned off.
Refer to ABOUT AUTO POWER OFF FUNCTION on page 15.
HBF-206IT-Z_B_M.fm Page 38 Monday, February 22, 2010 4:24 PM