15
H8CA-S
H8CA-S
When mounting two or more counters in a vertical line, arrange all
the adapters so that the molded springs of the Y92F-30 adapters
are positioned on the right and left sides.
When mounting two or more counters in a horizontal line, arrange
all the adapters so that the molded springs of the Y92F-30 adapt-
ers are positioned on the top and bottom sides.
By attaching the P3GA-11 back connecting socket to a panel
mounted H8CA-S, wiring can be performed in the same manner
as the front connecting socket.
Removal
To remove an H8CA-S panel mounted witha Y92F-30 adapter,
loosen the two screws of the adapter, pry up the top and bottom
hooks of the adapter, and pull the H8CA-S out from the front of
the panel.
! Caution
The H8CA-S has a built-in lithium battery. Be sure to dispose
of the old H8CA-S properly, as lithium batteries are likely to ex-
plode if incinerated.
Molded spring
Molded spring
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
Cat. No. GC TMCN1
Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
1-800-55-OMRON
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.com/oci
3/02
Specifications subject to change without notice
