Omron H3DS Series User Manual Download

Page: 1 / 42

Solid-state Timer

H3DS

B-9

Solid-state Timer

H3DS

DIN Track Mounted, Standard 17.5-mm Width Timer Range

• A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock.

(24 to 230 VAC/VDC with H3DS-XL

)

• Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the Timer’s front panel from being inadvertently

operated or being operated without authorization. The lock can only be unlocked and locked with an optional pen-type Lock Key.

• Screw-Less Clamp type available. (H3DS-

LC)

• Sticker provided for easy timer identification and management.

• Terminal clamp left open when delivered (screw terminal type).

• Finger protection terminal block to meet VDE0106/P100.

• Enables easy sequence checks through instantaneous outputs for a zero set value at any time range.

• Incorporates environment-friendly, cadmium-free contacts.

• Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.

■

Broad Line-up of H3DS Series

Contents

Solid-state Timer

H3DS-M/-S/-A...........................................................................................

H3DS-F.....................................................................................................

H3DS-G ....................................................................................................

H3DS-X ....................................................................................................

Common to ALL Timers

Installation of Screw-Less Clamp Models.................................................

Accessories ..............................................................................................

Precautions...............................................................................................

H3DS-M/S/A

Standard Timer

H3DS-M (eight multi-modes)
H3DS-S (four multi-modes)
H3DS-A (single mode)

Twin Timer

H3DS-F

Star-delta Timer

H3DS-G

Two-wired Timer

H3DS-X

H3DS-F

H3DS-G

H3DS

H3DS-X

Summary of Contents for H3DS Series











































Search results

Summary of Contents for H3DS Series

Reviews:

Related manuals for H3DS Series

Brands by name

Popular brands

Omron H3DS Series, Manual

Search results

Summary of Contents for H3DS Series

Reviews:

Related manuals for H3DS Series

Brands by name

Popular brands