Omron H3CR-A Manual Download Page 43 | Manualshive

Page: 43 / 55

background image

H3CR

H3CR

45

Operation

Note: The undermentioned is common for all H3CR models.

Basic Setting

Setting of Selectors

The selectors can be turned clockwise and counterclockwise to se-
lect the desired time unit, time range, or operating mode.
Each selector has a snap mechanism that secures the selector at a
given position. Set the selector at a position at which it is secured.
Do not set it midway between two securing positions or a malfunc-
tion could result from improper setting.

Selection of Operating Mode

•

H3CR-A Multifunctional Timer

Turn the operating mode selector with a screwdriver until the de-
sired operating mode (H3CR-A/AP/AS: A, B, B2, C, D, or E,
H3CR-A8/A8S/A8E: A, B2, E or J, H3CR-A-300: G or J) appears in
the display window located above the selector.

Groove for
screwdriver

Operating mode
display window

Operating mode
selector

(i.e., H3CR-A)

Selection of Time Unit and Time Range

•

H3CR-A Multifunctional Timer

The desired time unit (sec, min, hrs, or 10h) is displayed in the win-
dow below the time setting knob by turning the time unit selector lo-
cated at the lower right corner of the front panel. A time range (1.2, 3,
12, or 30/2.4, 6, 24, or 60 for H3CR-A

j

-301) is selected with the

time range selector at the lower left corner of the front panel, and the
selected time range appears (in the window at the lower right part)
within the plastic frame of the time setting knob.

Scale range
display window

Time unit selector

Time unit display window

Time range
selector

Time setting
knob

•

H3CR-F Twin Timers

A time range (0 to 1.2, 0 to 3, 0 to 12, or 0 to 30) is selected for ON-
and OFF-time using the time range selector at the lower left corner
of the front panel, and the selected time range appears within the
plastic frame of the time setting knob (= scale range display win-
dows).

Time range
selector

For ON-time, the desired time unit (sec, 10 s, min, and hrs, or 10 s,
10 min, hrs, and 10 h) is indicated in the ON-time unit display win-
dow at the lower right corner of the front panel and can be changed
by turning the ON-time unit selector located below the ON-time unit
display window.

ON-time unit
selector

For OFF-time, the desired time unit (sec, 10 s, min, and hrs, or 10 s,
10 min, hrs, and 10 h) is indicated in the OFF-time unit display win-
dow at the upper right corner of the front panel and can be changed
by turning the OFF-time unit selector located below the OFF-time
unit display window.

OFF-time unit
selector

«
...
41
42
43
44
45
...
»

Summary of Contents for H3CR-A
























































Reviews:

No comments

Related manuals for H3CR-A

Brand: Leviton Pages: 2

Brand: Goldair Pages: 6

Brand: Orbit Manufacturing Pages: 40

Brand: SmartPool Pages: 2

Brand: BEMKO Pages: 5

Brand: zassenhaus Pages: 2

Brand: PAPILLON Pages: 3

Brand: vlahova Pages: 11

DPT-Console v. 3.3

Brand: ALFTECH Pages: 12

Brand: EZ Pages: 2

Brand: Omron Pages: 2

Brand: WESTEK Pages: 2

Brand: Westinghouse Pages: 1

Brand: Westinghouse Pages: 2

Brand: Westinghouse Pages: 11

Brand: Westinghouse Pages: 10

Regatta Race Timer W014

Brand: Gill Pages: 24

Brand: aldes Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands