Profinet Quick Start Guide
Rev 1.01
8 of 8
Use ‘Edit’ button to modify settings.
For example, to change the input range on ‘Smart Slice AD2’ from 0V-5V to 4mA-20mA
Once changes have been made, click ‘OK’ to close the Edit window. Use the ‘Download’ button to
transfer the new settings to the Smart Slice Coupler. The unit will usually require a ‘restart’ for the new
settings to take effect.
Hint – make a backup
Please keep a backup copy of the Cx-Configurator FDT file (*.cpr). Once configuration is downloaded
to the IO Controller, it is not possible to upload configuration ‘layout’ details. It is not possible to
connect with a ‘blank’ Cx-Configurator FDT network and upload devices that are connected to
resurrect Cx-Configurator FDT configuration.
Further Information
For more detailed information about PROFINET IO setup, configuration and operation please refer to
the relevant Omron manuals and support information:-
W12E-EN-xx CJ1W-PNT21
Operation
Manual
W16E-EN-xx CS1W-PNT21
Operation
Manual
W13E-EN-xx
GRT1-PNT Operation Manual
Please use myOMRON.com to search for more PROFINET articles:-
For example …
http://www.myomron.com/modules/KB/file_d.php?id=109
Technote_Profinet
PROFINET Quick Start Guide
Revision 1.00
November 2010
Original document
Revision 1.01
December 2010
Addition of Smart Slice parameter setup via Ethernet
