G3PX
G3PX
14
4. Loosen the screws on both corners.
Loosen
Loosen
5. Hold the indented part of both corners to dismount the
Cartridge.
Mounting
1. Apply silicone grease (provided with the G32X-A) to the entire
surface of the heat radiator.
2. Make sure there is no dust or pieces of wire on the heat
radiators of the G32X-A or the G3PX.
3. Insert the Cartridge into the opening of the G3PX so that the
letters on the Cartridge and those on the G3PX are in the
same direction and sides A and B are even.
A
B
4. Tighten the screws on both corners with a tightening torque of
0.59 to 0.78 N
S
m.
5. Tighten the center screws of the G3PX with a tightening
torque of 0.59 to 0.78 N
S
m.
6. Attach the terminal cover.
7. Switch on the power and check the G3PX to be sure it works
properly.
External Variable Resistor
The G32X-V3K and G32X-V2K are provided with a set consisting of
adjuster, knob, and nameplate.
Resistive value
(see note 1)
Model
3 k
Ω
G32X-V3K (see note 2)
2 k
Ω
G32X-V2K
Note:
1. The G32X-V3K is equivalent to the conventional
G32X-VR.
2. Resistive Value
The resistance is
read on the back of
the variable resistor.
External DUTY Adjuster
Knob
Mounting Holes
Nameplate
2.5
±
1
31
±
1 dia.
15 min.
17 max.
10
±
1
20
±
1
1.6
±
0.2
R26 max.
1
±
0.1
M9P0.75
2.8
±
0.2 dia.
12
±
0.2
30 max.
6 dia.
0
–0.1
Filled with
white resin
17
14
6.5
1.6
13.4
26
34
3 dia. hole
12
±
0.2
9.5 dia. hole
G32X-VR
100
%
48
48
