G3PX
G3PX
12
4. Set the RUN/SET switch to RUN.
When all settings have been finished, the OPEN indicator is
OFF.
Note:
1. The G3PX can control any part of the phase as long as
the controlled phase is approximately 1/6
π
or more in
width.
2. Be sure to prepare terminals 18 and 19 corresponding to
the supply frequency of 50 Hz or 60 Hz. Otherwise, a
setting error will result in a malfunction regardless of the
RUN/SET switch setting.
When the error has occurred, turn the ALARM adjuster
counterclockwise to the minimum setting, reset the
G3PX, and readjust.
