![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222456.webp)
7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
454
Controlling/Outputting through Serial Communication (Non-procedure)
FZ4 User's Manual
<Response format>
When processing is performed normally
When processing is not performed normally
Note
●
If DATASAVE command is executed when using scene groups 1 to 31, system data is saved on the controller's
flash memory and scene group data is saved to the USB memory. If there is no USB memory plugged in, ER is
returned.
●
Do not turn off power to the controller until there is a response.
DATE
Acquiring date and time
Acquires the date and time from the internal calendar timer in the controller.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Year/Month/Date/
Hour/Minute/Second
The acquired date and time are output as a response.
Year: 4 digits
Month: 2 digits
Date: 2 digits
Hour: 2 digits
Minute: 2 digits
Second: 2 digits
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
