Omron FHV Series Setup Manual Download Page 110

Page: 110 / 164

Please attach the Lighting module following these procedures.

Attach the lens module
For more detailed information on the lens module, please refer to

5-1-3 Lens Module / IP40

Configuration

on page 5 - 5.

Attach the waterproof packing (small).

Precautions for Correct Use

Place the waterproof packing along the groove of the smart camera, being careful not to twist it.

Waterproof packing (small)

Connect the harness of the lighting module to the (white) lighting module connector of the
Smart Camera.

Precautions for Correct Use

• Do not pull or stress the harness when attaching.
• Hold the connector part of the harness and attach/detach the lighting module.
• Take care that the harness does not catch on, or get pinched between any parts of the case

when assembling.

Lighting module

Harness

5 Installation

5 - 12

FHV Series Smart Camera Setup Manual (Z408-E1)

Summary of Contents for FHV Series





































































































































































Search results

Summary of Contents for FHV Series

Reviews:

Related manuals for FHV Series

Brands by name

Popular brands

Omron FHV Series, Setup Manual

Search results

Summary of Contents for FHV Series

Reviews:

Related manuals for FHV Series

Brands by name

Popular brands