Omron F3SJ-B Series, User Manual

Page: 80 / 112

66
Ch
apt
e
r
3
Wi
ring
F3SJ-B
User’s Manual
Wiring/Installation

Wiring Method
Perform wiring according to the following procedure.
1.
Connect an emitter cable (F39-JD  -L, gray, sold separately) to the emitter's connection cable (gray).
2.
Connect a receiver cable (F39-JD  -D, black, sold separately) to the receiver's connection cable
(black).
3.
Connect the +24 V line of the power supply directly to the protective earth (PE).
 Single-ended connector cable (F39-JD  A, sold separately)
<Internal wiring diagram> (F39-JD  A-L, F39-JD  A-D)
Set model
name
Emitter cable Receiver cable L (mm)
F39-JD3A F39-JD3A-L Gray cable F39-JD3A-D Black cable 3000
F39-JD7A F39-JD7A-L F39-JD7A-D 7000
F39-JD10A F39-JD10A-L F39-JD10A-D 10000
F39-JD15A F39-JD15A-L F39-JD15A-D 15000
F39-JD20A F39-JD20A-L F39-JD20A-D 20000
Insulated vinyl round cable dia. 6.6, shielded 8-wire (4-pair)
(Cross section of conductor: 0.3mm
2
/insulator diameter: dia. 1.15mm)
dia.15
39.5
L
M12 IP67 connector
(Unit: mm)
White
Brown
Black
Yellow
Gray
Pink
Blue
Red
1
2
3
4
5
6
7
8
NC
+24 VDC
Test input
Reset input
Communication line (+)
Communication line (-)
Communication line (+)
Communication line (-)
0V
NC NC
5
8
4
3
2 1
7
6
Connected to connection cable or
double-ended connector cable
Shield Shield
Female
Safety output 2
+24 VDC
Safety output 1
Auxiliary output
0V
White
Brown
Black
Yellow
Gray
Pink
Blue
Red
Emitter Receiver
Twisted pair wires are white and red, brown and blue, black and yellow, and gray and pink