E63-WF
3
Safety Precautions
Refer to
Warranty and Limitations of Liability
.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the Encoder under ambient conditions that exceed the
ratings.
●
Mounting
•
Mount to DIN Track as shown in the following diagram.
•
Hook part (A) at the top of the E63-WF on the DIN Track first and
then press in on the E63-WF in the direction indicated by (B).
•
Removal from DIN Track
Pull down on the track stopper (C) with a flat-blade screwdriver and
then remove the E63-WF from the DIN Track. When using DIN
standard 35 track, keep other devices on the track separated from
the E63-WF by at least 30 mm to facilitate mounting and removal.
•
Do not place the connection cable together with high-voltage
cables. Keep it isolated from other cables whenever possible.
•
The response speed of the E63-WF is 120 kHz. Do not allow the
Rotary Encoder to exceed this speed.
●
Connection
Spurious pulses may be generated when power is turned ON and
OFF. Wait at least 0.1 s after turning ON the power to the Encoder
before using the connected device, and stop using the connected
device at least 0.1 s before turning OFF the power to the Encoder.
Also, turn ON the power to the load only after turning ON the power
to the Encoder.
WARNING
Precautions for Correct Use
(B)
(A)
DIN Track (DIN
standard 35)
(PFP-100N or
PFP-100N2)
(C)
30 mm min.
30 mm min.
Track stopper
(yellow)
