2-2
Section
Mounting the Serial Communications Models
10
2-2
Mounting the Serial Communications Models
I/O Units are not mounted on the E5ZE.
Mount the appropriate I/O Units according to the specification of the E5ZE.
The diagram below is the view from the back of component side.
Type of I/O Units
Communication Unit
CT Input Unit
Output Unit
E53-E01 for
RS-232C
E53-E04 for
RS-422/RS-485
E54-E8CT
E53-E8Q for voltage
output
E53-E8C for current
output
or
Use this CT input unit in combination
with the E53-E8Q voltage output unit.
or
Tighten the screws through the holes marked with a black dot (
) to the fixing
studs of the E5ZE.
Mounting Position of I/O Units
Communication Unit
CT Input Unit
Output Unit
Connector
Communication
Unit
CT Input Unit
Connector
Output Unit
Connector
Remove this screw when the Unit is
mounted on the model with casing.
I/O Units
