manualshive.com logo in svg

Omron E5EZ-PRR Series, Manual

Share
Download
Omron E5EZ-PRR Series Manual Download Page 19

Digital Position-Proportional Controllers

 

E5EZ-PRR

47

• Meaning

• Rectification

 

Measures

• Operations

 

with

 

Errors

There has been an error in the internal memory.

Power off and then restart the unit. If the display remains unchanged, it will be 
necessary to change the E5EZ-PRR. If the display is recovered, the root of the 
problem may have been that noise from the energy flow was affecting the control 
system. Check for any such noise.

Control output and alarm output will be shut off.

• Meaning

• Rectification

 

Measures

• Operations

 

with

 

Errors

Errors appear in potentiometer input. Valve opening has exceeded its regular 
range of -10% to 110%.

Check to see if there have been any wiring errors, burnouts, or short-circuits in 
the potentiometer. 
If there are no problems with the wiring, you can restart the power supply. If the 
display remains unchanged, it will be necessary to change the E5EZ-PRR. 
If the display, the root of the problem may have been interference, which should 
be avoided in the future.

The control output will be determined according to the designated value for error 
MV.
Alarm output will operate as normal.

• Meaning

• Rectification

 

Measures

• Operations

 

with

 

Errors

Electro-mechanical calibration was not properly completed.

After confirming the potentiometer and the wiring of the motor driving valve, per-
form electro-mechanical calibration again.

Control output and alarm output are OFF.

-1999

(-199.9)

9999

(999.9)

-1999

(-199.9)

9999

(999.9)

-1999

(-199.9)

9999

(999.9)

-1999

(-199.9)

9999

(999.9)

S. Err indicator

S. Err indicator

S. Err indicator

S. Err indicator

S. Err indicator

S. Err indicator

S. Err indicator

Display range

Input indicator range

Value display

Display range

Input indicator range

Value display

Display 

range

Input indicator range

Value display

Display range

Input indicator range

Value display

cccc indicator

cccc indicator

cccc indicator

Memory Errors

e111

----

Potentiometer Input Errors

err

Electro-Mechanical Calibration Error

Summary of Contents for E5EZ-PRR Series























Reviews:

No comments

Brands by name

Popular brands

Load more brands