Omron E5CD Manual Download Page 50

Page: 50 / 56

Temperature Sensors for Packaging Machines

E52

Accurately Measure Seal Temperature.
Temperature Sensors for Packaging
Machines.

• Heat resistance (sleeve: 0 to 260°C) and direct

installation to heat bars.

• Greater flexibility in the movable section (models with 30

cores).

• Protective tubing diameter of 1 mm with ground for high-

speed response.

• Usage together with the automatic filter adjustment

function of E5



D Digital Temperature Controllers is

recommended.

• New models with ferrules to help reduce wiring work have

been added to the previous models with M3 screw
connections.

Temperature Sensors for Packaging Machines

Refer to

Safety Precautions

for the E5CD/E5ED Digital

Temperature Controllers on page 43.

Classification

Description

Model and appearance

Temperature

range

Element

type

Conductor

type

Class

Protective

tubing

material

Terminal

type

Special models
for packaging
machines

Sheathed
thermocouple

E52-CA



D=1 S



0 to 650°C

K (CA)

Grounded
type

2 (0.75)

ASTM316L

Exposed
lead wires

Summary of Contents for E5CD

























































Search results

Summary of Contents for E5CD

Reviews:

Brands by name

Popular brands

Omron E5CD, Manual

Search results

Summary of Contents for E5CD

Reviews:

Brands by name

Popular brands