E3C-LDA
@
N
11
Handling precautions
1.
The E3C-LD11N/E3C-LR11N emits a visible laser beam. Never
stare into the beam. Be sure that the end of the beam path is
terminated. The best material for terminating the beam is a surface
painted with matt paint. If there are reflective surfaces in the beam
path, be sure that the reflected beam path is contained. If
containment is not possible for the application, do not allow the
beam to travel at eye level.
2.
Laser safety measures for laser devices are stipulated both in
Japan and overseas. Here, two cases are described: Application
in Japan and Application in a device to be shipped overseas.
1. Application in Japan
According to JIS C6802, the safety measures required of the user are
stipulated according to the class of the laser device. The E3C-LD11N/
E3C-LR11N is classified as a class-2 laser according to JIS C6802.
Laser Stickers
The following stickers are attached to the side of the sensor.
2. USA
When a laser device is exported to the USA, it falls under the laser
regulations of the FDA (Food and Drug Administration).
The E3C-LD11N/E3C-LR
@@
N are classified as a class-II laser by the
FDA, and it has already been registered with the CDRH (Center for
Devices and Radiological Health). Ask your OMRON representative
for details.
Laser Labels
Technical standards have been provided with the product. When
exporting to the USA, refer to the following illustration and replace the
label with the caution label. It is assumed that the E3C-LD11N/
E3C-LR
@@
N will be incorporated into a final system device. When
incorporating the E3C-LD11N/E3C-LR
@@
N, comply with the
following technical standards: US Federal Law 21 CFR 1040.10 and
1040.11.
3. Other Countries
• When exporting to countries other than the USA, replace the
Japanese warning labels with the English ones provided.
• When exporting to Europe, labels fall under EU standard
EN60825-1.
Laser Safety
Caution Label
Aperture Label
Certification
and Identification
Label
Caution Label
Certification and Identification Label
AVOID
EXPOSURE
Laser Radiation
is emitted from
this aperture
LASER RADIATION
DO NOT STARE INTO BEAM
PEAK POWER
PULSE DURATION
WAVE LENGTH
µV
µs
nm
A
CLASS II LASER PRODUCT
CAUTION
B
C
This laser product complies with
21 CFR 1040. 10 and 1040.11.
OMRON Corporation
Place of manufacture:
Shiokoji Horikawa, Shimogyo-ku,
Kyoto 600-8530 JAPAN
AYABE Factory, OMRON Corp.
Manufactured in
Aperture Label
