Liquid Level Sensor
E2K-L
7
■
Precautions
◆
Operating Environment
●
Surrounding Atmosphere
• In order to maintain operating reliability, do not use or keep
the Sensor in locations outside the specified temperature
range, or in outdoor locations.
• Although this product has waterproof specifications, do not
use it in locations where it will come into direct contact with
liquids (e.g., water or cutting oil). Such locations can inter-
fere with the electrostatic capacity method used by the
Sensor.
• Do not use the Sensor in locations where chemicals (in
particular, solvents or strong acids) are present in the
atmosphere.
• Even if the Sensor is used within the specified temperature
range, do not subject it to sudden changes in temperature
because this will shorten the service life.
◆
Miscellaneous
• Drift may occur when the power supply is turned ON. If the
dielectric constant of the liquid is low, the detection level of
the liquid may be 2 to 3 mm higher than the set level for
approximately 20 minutes after power is turned ON.
■
Dimensions
(Units: mm)
Correct Use
20
5
43
41
33
R6.5
24
11
5
1.5
6.5
1
3.5
6
6
Sensitivity adjuster
Operation indicator
(orange)
4.5
Mounting holes
4
R17.5
2.9-dia. 3-conductor vinyl-insulated round cable
(cross-sectional area of conductors: 0.14 mm
2
; insulation diameter: 0.9 mm)
Standard length: 2 m
Sensing face
E2K-L13MC1
20
R13
33
11
3
6.5
1
6
Operation indicator
(orange)
Sensitivity adjuster
4.5
3.5
6
2
1.5
Mounting holes
34
32
24
R17.5
5
2.9-dia. 3-conductor vinyl-insulated round cable
(cross-sectional area of conductors: 0.14 mm
2
; insulation diameter: 0.9 mm)
Standard length: 2 m
Sensing face
E2K-L26MC1
