DRT1-DA02
DRT1-DA02
117
Precautions
Refer to the
DeviceNet Operation Manual (W267)
before using the
Module.
·
To prevent inductive noise, do not wire power lines or
high-tension lines along with or near the cables. Other
noise-prevention techniques, such as using shielding or
separate conduit/ducting, are also effective.
·
Install the Module as far as possible from equipment that
generates strong high-frequency signals (such as high-fre-
quency welders) and equipment that generates surges. Such
equipment can cause the Module to malfunction.
·
Install surge absorbers or noise filters on nearby equipment that
generates noise, particularly equipment that has inductive
components such as motors, transformers, solenoids, or
magnetic coils.
·
When using a noise filter in the power supply, check the voltage
and current and install the noise filter as close as possible to the
Module.
Cat. No.
P10FAX1A 6/00
Specifications subject to change without notice. Printed in U.S.A.
OMRON ELECTRONICS, INC.
One East Commerce Drive
Schaumburg, IL 60173
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
1-800-55-OMRON
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
R
