DRT1-DA02
DRT1-DA02
115
Characteristics
Communications power supply
voltage
11 to 25 VDC (supplied from the communications connector)
Internal power supply voltage
20.4 to 26.4 VDC (24 VDC
+10%
/
--15%
)
Current consumption
Communications: 30 mA max. at 24 VDC
Internal circuit:
150 mA max. at 24 VDC
Noise immunity
Power supply normal:
±
600 V for 10 minutes with a pulse width of 100 ns to 1
m
s
Power supply common:
±
1,500 V for 10 minutes with a pulse width of 100 ns to 1
m
s
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Malfunction: 200 m/s
2
(approx. 20G)
Destruction: 300 m/s
2
(approx. 30G)
Dielectric strength
500 VAC for 1 min (1-mA sensing current between insulated circuits)
Mounting method
M4 screw mounting or 35-mm DIN track mounting
Mounting strength
No damage when 50 N (approx. 5 kgf) pull load was applied for 10 s in all directions (10 N min.
(approx. 1 kgf) in the DIN track direction)
Terminal strength
No damage when 50 N (approx. 5 kgf) pull load was applied for 10 s in all directions
Ambient temperature
Operating:
0
°
C to 55
°
C (with no icing or condensation)
Storage:
--25
°
C to 65
°
C (with no icing or condensation)
Ambient humidity
Operating:
35% to 85% (no condensation)
Weight
200 g max.
Nomenclature
DRT1-DA02
The DIP switch pins have the following functions:
Pins 1 to 6: Node number
Pins 7 and 8: Baud rate
Pin 9 and 10: Output status after communications error
Communications
Connector
Connects the network communications
cable. The communications power is
also supplied through this connector.
Rotary Switch
Sets the output ranges.
Terminal Block
Connects the output power supply and analog
outputs.
Indicators
Indicates the status of the Slave and network
