![background image](http://html.mh-extra.com/html/omron/devicenet-3g8f7-drm21-e/devicenet-3g8f7-drm21-e_operation-manual_743611032.webp)
15
Installing the Board in the Computer
Section 2-2
Board ID Setting
Set the board ID on the DeviceNet PCI Board’s rotary switch before installing
the board.
Note
Static electricity can damage the DeviceNet PCI Board’s electronic
components. Do not touch the Board’s connector or components.
Set a board ID between 0 and 7. If two or more DeviceNet PCI Boards are
being installed in the computer, be sure that each Board has a unique board
ID setting. The factory setting is 0.
Installing the Board in the
Computer
Install the DeviceNet PCI Board in one of the computer’s PCI slots.
Refer to your computer’s User’s Guide for details on installing a PCI card in
the computer.
Note
(1) Turn OFF the computer power supply before installing the DeviceNet PCI
Board.
(2) Take precautions against static electricity.
1,2,3...
1.
Disconnect all cables from the DeviceNet PCI Board.
2.
Turn OFF the computer in which the board is being installed and unplug
the computer’s power cord.
3.
Remove the computer’s case and make any other preparations needed to
install a PCI board. (Refer to your computer’s User’s Guide for details.)
4.
Align the Board with the computer’s PCI slot, slide it into position, and
press it firmly into the slot. Check that the Board’s PCI interface is com-
pletely and evenly installed into the PCI slot. Do not use much force when
pressing the board; it should slide into the slot with little resistance.
5.
Pull on the Board lightly to check that it is installed securely and won’t slip
out.
6.
Secure the Board by tightening the retaining screw, indicated by (b) in the
diagram, to 0.5 N
⋅
m.
7.
Attach the case to the computer and turn ON the power.
8.
The installation method differs depending on the type of Windows operat-
ing system used. Refer to the following during installation.
• Windows 95, 98, Me, 2000, or XP
After the computer is started, the Board will be detected as new hardware
and the InstallShield Wizard will start. Refer to
for the rest of the installation procedure.
• Windows NT 4.0
The PCI Board will not be recognised when the computer is started.
Install the driver for the PCI Board at the same time as Scanner SDK.
Refer to
2-4 Installing the Scanner SDK Software
for the rest of the instal-
lation procedure.
(b)
(a)
Summary of Contents for DeviceNet 3G8F7-DRM21-E
