Guard Lock Safety-door Switch
D4JL
S
a
fe
ty D
o
o
r
Sw
it
c
h
e
s
P
recau
ti
on
s f
o
r
All Sa
fe
ty
Do
o
r
Switch
e
s
D4
NS
D4
GS-
N
D
4
BS
D4
G
L
D4
JL
D
4
NL
D4
BL
D4
NH
D
4
0
B
D4
NS-
SK0
1
D4
NS-
SK3
0
D4
J
L
-SK3
0
56
Specifications
■
Standards and EC Directives
Conforms to the following EC
Directives
• Machinery Directive
• Low Voltage Directive
• EN 1088
• EN 60204-1
• GS-ET-19
• CCC (Application scheduled)
Certified Standards
Note: CSA C22.2 No. 14 was certified by UL.
■
Certified Standard Ratings
TÜV (EN 60947-5-1)
Note: Use a 10-A fuse type g
I
or g
G
that conforms to IEC 60269 as a
short-circuit protection device. This fuse is not built into the
Switch.
UL/CSA (UL 508, CSA C22.2 No. 14)
A300
Solenoid Coil Characteristics
Indicator Characteristics
■
Characteristics
Note: 1. The above values are initial values.
2. The degree of protection is tested using the method specified by
the standard (EN 60947-5-1). Confirm that sealing properties
are sufficient for the operating conditions and environment
beforehand. Although the switch box is protected from dust or
water penetration, do not use the D4JL in places where foreign
material may enter through the key hole on the head, otherwise
Switch damage or malfunctioning may occur.
3. The durability is for an ambient temperature of 5 to 35°C and an
ambient humidity of 40% to 70%. For further conditions, consult
your OMRON sales representative.
4. Do not pass a 3-A, 250-VAC load through more than two
circuits.
5. These figures are minimum requirements for safe operation.
6. This figure is based on the GS-ET-19 evaluation method.
7. This value will vary with the switching frequency, environment,
and reliability level. Confirm that correct operation is possible
with the actual load beforehand.
8. Use a 10-A fuse type g
I
or g
G
that conforms to IEC 60269 as a
short-circuit protection device.
Certification
body
Standard
File No.
TÜV Product
Service
EN 60947-5-1
(certified direct opening)
Consult your OMRON
representative for
details.
UL (See note.) UL 508, CSA C22.2 No.14
CQC (CCC)
GB14048.5
Application scheduled
Item
Utilization
category
AC-15 DC-13
Rated operating current
(Ie)
3 A
0.27 A
Rated operating voltage
(Ue)
240 V
250 V
Rated
voltage
Carry
current
Current (A)
Volt-amperes (VA)
Make
Break
Make
Break
120 VAC
10 A
60
6
7,200
720
240 VAC
30
3
Item
Type
24 VDC
Rated operating voltage
(100% ED)
24 VDC
Current consumption
Approx. 200 mA
Insulation
Class F (130°C max.)
Item
Type
LED
Rated voltage
24 VDC
24 VDC
Current consumption
Approx. 1 mA
Approx. 8 mA
Color (LED)
Orange
Green
+10%
−
15%
Degree of protection
(See note 2.)
IP67 (EN 60947-5-1)
(This applies for the Switch only. The degree
of protection for the key hole is IP00.)
Durability
(See note
3.)
Mechanical 1,000,000 operations min. (trapped key:
10,000 operations min., rear release button:
3,000 operations min.)
Electrical
500,000 operations min. for a resistive load
of 3 A at 250 VAC (See note 4.)
Operating speed
0.05 to 0.5 m/s
Operating frequency
30 operations/minute max.
Rated frequency
50/60 Hz
Direct opening force
(See note 5.)
60 N min. (EN 60947-5-1)
Direct opening travel
(See note 5.)
15 mm min. (EN 60947-5-1)
Holding force
(See note 6.)
3,000 N min.
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Minimum applicable
load (See note 7.)
Resistive load of 1 mA at 5 VDC (N-level
reference value)
Rated insulation voltage
(U
i
)
300 V (EN 60947-5-1)
Rated open thermal
current (I
th
)
10 A between terminals 12 and 41, 3 A
between all other terminals (EN 60947-5-1)
Impulse withstand
voltage
(EN 60947-5-1)
Between terminals of same polarity
2.5 kV
Between terminals of different
polarity
4 kV
Between other terminals and
uncharged metallic parts
6 kV
Conditional short-circuit
current
100 A (EN 60947-5-1) (See note 8.)
Pollution degree
(operating environment)
3 (EN 60947-5-1)
Protection against
electric shock
Class II (double insulation)
Contact resistance
(initial value)
25 m
Ω
max. per contact
Vibration
resistance
Malfunction 10 to 55 Hz, 0.75-mm single amplitude
Shock
resistance
Destruction 1,000 m/s
2
min.
Malfunction 80 m/s
2
min.
Ambient operating
temperature
−
10 to +55°C (with no icing)
Ambient operating
humidity
95% max.
Weight
Approx. 650g
