Miniature Limit Switch
D4CC
3
Special Mounting Plate
It is possible to replace an WL Limit Switch with a D4CC Limit Switch
mounted on this plate without changing the position of the dog or
cam.
The following is the conversion table:
Example
Remarks
There is no difference in mounting pitch between the Mounting Plate
and the WL. The mounting depth of the D4CC with the Mounting
Plate attached is, however, shorter than that of the panel-mounted
WL.
Specifications
■
Approved Standards
■
Approved Standard Ratings
UL-CSA
D4CC-1, D4CC-2
D150
■
Ratings
Note: 1. The above current ratings are for steady-state current.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp loads have an inrush current of 10 times the steady-state current.
4. Motor loads have an inrush current of 6 times the steady-state current.
D4CC-3, D4CC-4, 1 A at 30 VDC
WL
D4C
Plate model
Top plunger:
WLD
Plunger: D4CC-
@
001
D4C-P001
Top roller plunger:
WLD2
Roller plunger:
D4CC-
@
002
D4C-P002
Roller lever:
WLG2
Roller lever:
D4CC-
@
024
D4C-P020
Dog
Dog
Mounting
plate
Plate
Agency
Standard
File No.
UL
UL508
E76675
CSA
CSA C22.2 No. 14
LR45746
Rated
voltage
Carry
current
Current
Volt-amperes
Make
Break
Make
Break
120 VAC
1.0 A
3.6 A
0.6 A
432 VA
72 VA
Rated voltage
Non-inductive load
Inductive load
Resistive load
Lamp load
Inductive load
Motor load
NC
NO
NC
NO
NC
NO
NC
NO
125 VAC
1 A
1 A
1 A
0.7 A
1 A
1 A
1 A
1 A
30 VDC
1 A
1 A
1 A
1 A
1 A
1 A
1 A
1 A
Inrush current
NC
5 A max.
NO
2.5 A max.
