background image

G-197

F3SL

D

40B

Compact Non-contact Door Switch

D40B

Detects the open/
closed state of doors 
without making 
contact and has high 
resistance to the 
environment.

• Detects the open/closed state of doors 

without making contact by combining a 
special magnetic actuator and switch. 
The switching mechanism is not easily 
disabled.

• The non-contact operation prevents 

the creation of particles due to abra-
sion.

• The actuator and switch can be 

washed in water. There are no key-
holes where dirt can accumulate, mak-
ing it easy to keep machinery clean.

• Small distortions in the door and me-

chanical discrepancies can be ab-
sorbed in the allowable operating range 
of the magnetic actuator and switch.

• Conforms to Category 3.

Model Number Structure

Model Number Legend

Sensor

1. Type

1: Standard Sensor
2: Elongated Sensor
3: High-temperature Type Sensor

2. Auxiliary Output

B: None
D: 1 NC
E: 1 NO

3. Cable Length

3:

3 m

5:

5 m

10:

10 m

4. Wiring Method

None: Pre-wired
C:

Connector (switch side only)

Controller

1. Type

1: One main c one auxiliary contact (See note.)
2: Two main co one auxiliary contact (See note.)

Note: The auxiliary contacts use non-safety output.

1 2 3 4

D40B-

@@@@

1

D40B-J

@

F502-EN2-04.book  Seite 197  Dienstag, 26. Juli 2005  5:48 17

Summary of Contents for D40B -











Reviews: