160
Using a Programming Console
Section 8-1
8-1
Using a Programming Console
This section provides information on connecting and using a Programming
Console. Refer to
9-3 Programming Console Operation Errors
for details on
errors that might occur during Programming Console operations.
8-1-1
Connecting the Programming Console
The following diagram shows how a CQM1H-PRO01-E, CQM1-PRO01-E, or
C200H-PRO27-E Programming Console can be connected to the communi-
cations port on the CPM2C-S CPU Unit.
Note
1.
Connect the Programming Console to the peripheral port. A Programming
Console cannot be connected through the RS-232C port on a CPM2C-
CN111 Adapter.
2.
If the Programming Console’s cable is disconnected and then reconnected
within 2 seconds, it won’t be necessary to reenter the password and the
previous display status will remain. In some cases, it won’t be necessary
to reenter the password if the Programming Console’s cable is disconnect-
Peripheral port
CPM2C-S CPU Unit
CPM2C-CN111
Connecting Cable
CS1W-CN114
Connecting Cable
CQM1-PRO01-E
CS1W-CN224 or
CS1W-CN624
Connecting Cable
CQM1-PRO27-E
C200H-CN222 or
C200H-CN422
Connecting Cable
Peripheral port
A CQM1H-PRO01-E Programming Console
can be connected directly.
CQM1H-PRO01-E
A C200H-PRO27-E Programming Con-
sole can be connected directly to the
CPU Unit using a CS1W-CN224 or
CS1W-CN624 Connecting Cable.
CPM2C-S CPU Unit
CPM2C-CIF01-V1
Summary of Contents for CPM2C-S100C
