701
Auxiliary Area Allocations by Address
Appendix D
A201
10
Online Editing
Wait Flag
ON when an online editing process is
waiting.
(If another online editing command is
received while waiting, the other
command won’t be recorded and an
error will occur.)
ON: Waiting
for online
editing
OFF: Not
waiting for
online editing
Cleared
Cleared
---
A527
11
Online Editing
Flag
ON when an online editing process is
being executed.
ON: Online
editing in
progress
OFF: Online
editing not in
progress
Cleared
Cleared
---
A527
A202
00 to 07
Communica-
tions Port
Enabled Flags
ON when a network instruction
(SEND, RECV, CMND, or PMCR)
can be executed with the corre-
sponding port number. Bits 00 to 07
correspond to communications ports
0 to 7.
When two or more network instruc-
tions are programmed with the same
port number, use the corresponding
flag as an execution condition to pre-
vent the instructions from being exe-
cuted simultaneously.
(The flag for a given port is turned
OFF while a network instruction with
that port number is being executed.)
ON: Network
instruction is
not being
executed
OFF: Net-
work instruc-
tion is being
executed
(port busy)
Cleared
---
---
---
15
Network Com-
munications
Port Alloca-
tion Enabled
Flag
ON when there is a communications
port available for automatic alloca-
tion.
Note
Use this flag to confirm
whether a communications
port is available for automatic
allocation before executing
communications instructions
when using 9 or more com-
munications instructions
simultaneously.
ON: Port
available
OFF: Port not
available
Cleared
---
---
---
A203
to
A210
All
Communica-
tions Port
Completion
Codes
These words contain the completion
codes for the corresponding port
numbers when network instructions
(SEND, RECV, CMND, or PMCR)
have been executed.
(The corresponding word will be
cleared when background execution
has been completed.)
Words A203 to A210 correspond to
communications ports 0 to 7.
Non-zero:
Error code
0000:
Normal condi-
tion
Retained
---
---
---
A214
00 to 07
First Cycle
Flags after
Network Com-
munications
Finished
Each flag will turn ON for just one
cycle after communications have
been completed. Bits 00 to 07 corre-
spond to ports 0 to 7. Use the Used
Communications Port Number
stored in A218 to determine which
flag to access.
Note
These flags are not effective
until the next cycle after the
communications instruction is
executed. Delay accessing
them for at least one cycle.
ON: First
cycle after
communica-
tions finish
only
OFF: Other
status
---
---
---
---
Address
Name
Function
Settings
Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words
Bits
Summary of Contents for CP1L-EL20DR-D
