Operating Instructions
Smoke Cut Filter
Commercial Use
Model No.
ET-SFD320C
ET-SFR320C
Thank you for purchasing this Panasonic product.
■
Carefully read through these operating Instructions and the operating instructions of the projector to ensure
safe and proper operation.
■
Please save this Operating Instructions for future use.
Attention
z
Do not reuse it. The smoke cut filter to be replaced should be an unused product.
z
Do not wash the smoke cut filter with water.
z
After attachment of this smoke cut filter, be sure to switch the [FILTER TYPE] setting of the projector from
[NORMAL] to [SPECIAL].
z
Dispose of the packaging materials properly after taking the product out of it.
Note
z
Setting the filter type to [SPECIAL] greatly increases the rotation rate of the fan.
z
Do not use smoke cut filter at high altitudes (1 400 m (4 593') above sea level) or in places where the ambi
-
ent temperature is 35°C or higher (30°C when used in portrait mode).
z
When this smoke cut filter is installed, the width of the projector increases by approximately 10 mm (13/32").
TQZJ501-1
Smoke cut filter
ET-SFD320C
Smoke cut filter
(Replacement Filter)
ET-SFR320C
