![background image](http://html.mh-extra.com/html/omron/cp1e-e-d-series/cp1e-e-d-series_user-manual_742511037.webp)
1-9
1 Overview and Specifications
CP1E CPU Unit Hardware User’s Manual(W479)
1-3 Sp
ecific
ation
s
1
1
-3-1
Gene
ral Specifications
1-3
Specifications
The following table lists the general specifications of CP1E CPU Units.
*1
Total of 110 mm with mounting brackets.
*2
Excluding cables.
*3
Use the external power supply to power input devices. Do not use it to drive output devices.
*4
This is the rated value for the maximum system configuration. Use the following formula to calculate power consumption for CPU Units with DC power.
Formula: DC power consumption = (5V current consumption × 5 V/70% (internal power efficiency) + 24V current consumption) × 1.1(current fluctuation factor)
The above calculation results show that a DC power supply with a greater capacity is required.
*5
The general specifications of the Expansion I/O Units and Expansion Units are measured under the same conditions as the CPU Units.
1-3-1
General Specifications
Item
AC power supply
DC power supply
Model
CP1E-
D
-A
CP1E-
S(1)D
-A
CP1E-
D
-D
CP1E-
S(1)D
-D
Enclosure
Mounted in a panel
Dimensions (H × D × W)
E/N/NA
-type
CPU Unit with 10 I/O points (CP1E-E10D
-
): 90mm
*1
×85mm
*2
× 66mm
CPU Unit with 14 or 20 I/O points (CP1E-
14/20D
-
): 90mm
*1
×85mm
*2
× 86mm
CPU Unit with 30 I/O points (CP1E-
30D
-
): 90mm
*1
× 85mm
*2
× 130mm
CPU Unit with 40 I/O points (CP1E-
40D
-
): 90mm
*1
× 85mm
*2
× 150mm
CPU Unit with 60 I/O points (CP1E-N60D
-
): 90mm
*1
× 85mm
*2
× 195mm
CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D
-
): 90mm
*1
× 85mm
*2
× 130mm
E/N
S(1)-type
CPU Unit with 14 or 20 I/O points (CP1E-
14D/20SD
-
): 90mm
*1
×78.6mm
*2
× 86mm
CPU Unit with 30 I/O points (CP1E-
30S(1)D
-
): 90mm
*1
× 78.6mm
*2
× 130mm
CPU Unit with 40 I/O points (CP1E-
40S(1)D
-
): 90mm
*1
× 78.6mm
*2
× 150mm
CPU Unit with 60 I/O points (CP1E-
60S(1)D
-
): 90mm
*1
× 78.6mm
*2
× 195mm
Weight
CPU Unit with 10 I/O points (CP1E-E10D
-
): 300g max.
CPU Unit with 14 I/O points (CP1E-
14(S)D
-
): 360g max.
CPU Unit with 20 I/O points (CP1E-
20(S)D
-
): 370g max.
CPU Unit with 30 I/O points (CP1E-
30(S
)D
-
): 600g max.
CPU Unit with 40 I/O points (CP1E-
40(S
)D
-
): 660g max.
CPU Unit with 60 I/O points (CP1E-
60(S
)D
-
): 850g max.
CPU Unit with 20 I/O points and built-in analog (CP1E-NA20D
-
): 680g max.
Electri-
cal spec-
ifications
Supply voltage
100 to 240 VAC 50/60 Hz
24 VDC
Operating voltage range
85 to 264 VAC
20.4 to 26.4 VDC
Power consumption
15 VA/100 VAC max.
25 VA/240 VAC max.
(CP1E-
10/14/20(S)D
-A)
9W max. (CP1E-E10D
-D)
13W max. (CP1E-N14/20D
-D)
50 VA/100 VAC max.
70 VA/240 VAC max.
(CP1E-NA20D
-A
CP1E-
30/40/60(S
)D
-A)
20W max. (CP1E-NA20D
-D
CP1E-N30/40/60(S
)D
-D) *
4
Inrush current
120 VAC, 20 A for 8 ms max. for cold start at room temperature
240 VAC, 40 A for 8 ms max. for cold start at room temperature
24 VDC, 30A for 20 ms max. for cold start at room temperature
External power supply *
3
Not provided. (CP1E-
10/14/20(S)D
-A)
24 VDC, 300 mA (CP1E-NA20D
-A
CP1E-
30/40/60D
-A
CP1E-
30/40/60S(1)DR-A)
Not provided.
Insulation resistance
20 M
Ω
min. (at 500 VDC) between the external AC ter-
minals and GR terminals
Except between DC primary current and DC secondary
current
Dielectric strength
2,300 VAC 50/60Hz for 1 min between AC external and
GR terminals leakage current: 5 mA max.
Except between DC primary current and DC secondary
current
Power interrupt time
10 ms min.
2 ms min.
Applica-
tion envi-
ronment
Ambient operating temper-
ature
0 to 55°C
Ambient humidity
10% to 90%
Atmosphere
No corrosive gas.
Ambient storage temperature
-20 to 75°C (excluding battery)
Altitude
2,000 m max.
Pollution degree
2 or less: Conforms to JIS B3502 and IEC 61131-2.
Noise resistance
2 kV on power supply line (Conforms to IEC61000-4-4.)
Overvoltage category
Category II: Conforms to JIS B3502 and IEC 61131-2.
EMC immunity level
Zone B
Vibration resistance
Conforms to JIS 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz
Acceleration of 9.8 m/s
2
for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Shock resistance
Conforms to JIS 60068-2-27.
147 m/s
2
, 3 times in X, Y, and Z directions
Terminal block
Fixed (not removable)
Terminal screw size
M3
Applicable standards
Conforms to EC Directives.
Grounding method
Ground to 100
Ω
or less.
Summary of Contents for CP1E-E**D Series
