-
Mate the CABLE CONNECTORS and the FLYOVER CABLE. Note, this part of
the assembly is only needed to check the layout for the clearance height for the
FLYOVER CABLE.
1. Concentric relationship of the CABLE CONNECTOR to the OUTER LINK and
BASE ASSY.
2. Coincident relationship of the CABLE CONNECTOR to the OUTER LINK and
BASE ASSY.
3. Concentric relationship of the long end of the FLYOVER CABLE to the CABLE
CONNECTOR attached to the BASE ASSY.
4. Coincident relationship of the long end of the FLYOVER CABLE to the inner
step on the CABLE CONNECTOR attached to the BASE ASSY.
6