7
.
Serial Communications Connection Procedure
23
7.3.3. Creating the I/O Table
Create the I/O table for PLC.
1
If the operating mode of PLC is
Run Mode or Monitor Mode,
change it to Program Mode by
following the steps below.
(1)Select
Operating Mode
-
Program
from the PLC Menu
of CX-Programmer.
(2)A confirmation dialog box on
the right is displayed. Check
that there is no problem and
click
Yes
.
*Refer to
Additional Information
on the previous page for the
settings concerning the dialog
display.
(3)Check that Stop/Program
Mode is displayed on the right
of the PLC model in the
project workspace tree.
2
Select
Edit
-
I/O Table and Unit
Setup
from the PLC Menu of
CX-Programmer.
The PLC IO Table Window is
displayed.
Precautions for Correct Use
The PLC will be reset after creating and transferring the I/O table in step 3 and subsequent
steps. Always confirm safety before creating and transferring the I/O table.
Summary of Contents for CJ2*-CPU Series
Page 63: ...58...
Page 64: ...2015 1115 P641 E1 01...