![background image](http://html1.mh-extra.com/html/omron/cj1w-ect21/cj1w-ect21_operation-manual_742071077.webp)
3 - 19
3 Memory Allocations
CJ-series EtherCAT Slave Units Operation Manual (W541)
3-4 I/O Com
m
u
n
ica
tion
Area Setting
s
3
3-
4-2 Sett
ing Pr
oced
ure with the C
X
-Progr
ammer
This section provides the setting procedure of the I/O Communication Area Setting Table with CX-Pro-
grammer.
1
Double-click
IO Table and Unit Setup
Icon in the project workspace in the CX-Programmer.
The PLC IO Table Window will be displayed.
When the EtherCAT Slave Unit is registered in the I/O tables of the CX-Programmer, the Unit
will be displayed in the I/O tables. Refer to
on page A-24 for details.
2
Right-click the EtherCAT Slave Unit in the I/O table and select
Unit Setup
from the menus.
3-4-2
Setting Procedure with the CX-Programmer
Summary of Contents for CJ1W- ECT21
