background image

12

3.

Using the Device

3.1

Applying the Arm Cuff

Remove tight-fitting clothing or tight rolled up sleeve from your left upper arm.
Do not place the arm cuff over thick clothes.

1.

Insert 

 

the air plug into 

 

the air jack securely.

2.

Wrap the arm cuff firmly in place around your left upper 
arm.

The bottom edge of the arm cuff should be 

 1/2 inch (1 to 2 cm) above the elbow. 

 Air tube is on the inside of your arm and aligned with your middle finger. 

3.

Secure closed with the fabric fastener.

Notes:

• When you take a measurement on the right arm, the air tube will be at the side of your elbow. Be careful 

not to rest your arm on the air tube. --- 

• The blood pressure can differ between the right arm and the left arm, and the measured blood pressure 

values can be different. OMRON recommends to always use the same arm for measurement. If the 
values between both arms differ substantially, please check with your physician which arm to use for your 
measurements.

Open both the front and rear covers to read the following:

The letter identifiers on the cover pages correspond to those in the body of this page.

O

J

a

N

b

HEM-7311-CACS_C_M.book  Page 12  Monday, April 21, 2014  12:10 PM

Summary of Contents for BP765CAN








































Reviews: