20
USING THE MEMORY FUNCTION
NOTES:
• The measurement value number is displayed
brie
fl
y in the Pulse Display area when you
press the Up/Down buttons (
/
).
• The date and time are alternately displayed
with the measurement values.
• If the date and time are not set, “-:--” is
displayed with the measurement values.
• Press the button repeatedly to display the
next values.
• Press and hold the button to display the
values faster.
TO DELETE ALL VALUES STORED IN THE MEMORY
The values stored in the memory are deleted by USER ID. You cannot partially delete
values stored in the memory. All values for the user you select will be deleted.
1. Press the START/STOP button to turn the monitor on.
2. Select your USER ID (A or B).
3. While holding the Down button (
), press the START/STOP button down
for more than
fi
ve seconds until the display appears as it does in the following
illustration.
4. Press the START/STOP button to turn the monitor off.
NOTE:
The monitor will automatically turn off after
fi
ve minutes.
Alternating
display
