background image

4

1.  Preparation 
1-1  Unpacking the product

Open the package box and take out the additional battery unit and accessories.

 

Battery unit for BH60PCW:   BHM60PC

 

Battery unit for BH100PCW:  BHM100PC

1-2  Checking the accessories

Make sure that all accessories are included and that there is no external damage.
If you notice any defects, immediately contact the shop of purchase.

1.  Instruction manual  ............................................... 1
2.  Battery connection cable  ..................................... 1 
3.  Battery connector covers...................................... 2

4.  Connector cover mounting screws

 ....................... 2

5.  Signal cable   ........................................................ 1
6.  Warranty card    .................................................... 1

Battery connection cable

Instruction manual

Warranty card

Signal cable

This unit uses a lead acid battery.

  Lead acid batteries are a valuable recyclable resource. Please recycle.

  For information about recycling, please contact our Electronic Systems & Equipments  repair center.

Notes

When moving the unit from a cold place to a warm place, leave it for several hours before using it. 

 If the unit is promptly turned ON after being moved to a warmer place, condensation may form inside the unit and cause it to fail. 

Do not install or store the unit in a place exposed to direct sunlight. 

 Doing so may cause the unit to fail or malfunction. 

 A rise in temperature may cause the built-in battery to deteriorate rapidly and become unusable.

Charge the battery immediately after purchase. 

 If you do not use the unit for a long time after purchase, the battery performance may deteriorate and it may become un-

usable. 

 The battery can be charged once the AC input plug of the UPS is connected to a wall outlet (commercial power).

When storing the UPS, charge the battery and turn OFF the power switch. 

 The battery discharges even when it not being used, and it goes into over discharge state if it is left for a long period of time.

  The backup time may become shorter or the battery may become unusable.

 The storable period of the built-in battery of the UPS is 6 months after being fully charged.

 When storing the battery for more than 6 months, connect the AC input plug of the UPS to a commercial power wall outlet 

before 6 months has elapsed.

 Turn OFF the power switch of the UPS during storage.

Pb

Caution (battery replacement)

Do not drop the battery or expose it to strong impact.

 Doing so may cause the battery to leak dilute sulfuric acid.

Do not replace the battery in a place where there is flammable gas.

 A spark may occur when connecting the battery, which may cause an explosion or fire.

Perform replacement on a stable and flat surface.

 Handle the battery carefully so that you do not drop it.

 Dropping the battery may result in injury or burns due to leakage (acid).

If fluid (dilute sulfuric acid) leaks from the battery, do not touch it.

 Doing so may cause blindness or burns.

Do not open or mutilate batteries.

 Released electrolyte is harmful to the skin and eyes. It may be toxic.

Summary of Contents for BHM100PC













Reviews: