A6T/A6S
A6T/A6S
5
Handling
Do not apply excessive operating force to the DIP Switch, otherwise
the DIP Switch may be damaged or deformed, thus causing the
switch mechanism to malfunction as a result. Apply an operating
force not exceeding 200% of the maximum rated operating force to
the DIP Switch.
Set the DIP Switch incorporating slide pins with a tiny, rounded ob-
ject, such as the tip of a ball-point pen or small screwdriver. Do not
set the DIP Switch using tweezers or any other sharp object, which
may damage the DIP Switch. Do not set the DIP Switch using the
point of a mechanical pencil, otherwise lead powder or fragments
may fall into the DIP Switch and internal circuit board, causing the
DIP Switch to malfunction and reducing the dielectric strength of the
circuit board.
OMRON Corporation
Control Components Division H.Q.
28th Fl., Crystal Tower Bldg.
1-2-27, Shiromi, Chuo-ku,
Osaka 540 Japan
Phone: 06-949-6115 Fax: 06-949-6134
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A102-E1-1
In the interest of product improvement, specifications are subject to change without notice.
Printed in Japan
0996-1M (0996)
a
