background image

3

A22LK

Locking the A22LK-2RLA-

@

 in the MAINTENANCE Position

Operation

Machine 

status

Machine operating mode

Routine

Non-routine

Maintenance

: Disable

Maintenance

: Enable

(1) Facilities stopped

RUN

STOP

1. Press the stop button on the machine. 
2. Confirm that the machine has stopped. 
3. Enable the D4SL-N to be unlocked.

(2) Door unlocked

STOP

Unlock the D4SL-N

(3) Mode changed

STOP

1. Turn the key of the A22LK to switch from [RUN] mode to [MAINTENANCE] mode.
2. Lock the A22LK.

(4) Open door and enter

STOP

1.  Remove the key of the A22LK. 
2.  Open the door, and enter with the key.

(5) Mode changed to 

MAINTENANCE

STOP

Insert the key into 
the A22TK, and turn 
the key to switch 
from [RUN] mode to 
[MAINTENANCE] 
mode. 

(6) Start maintenance

MAINTENANCE

Start maintenance.

(7) End maintenance

MAINTENANCE

STOP

Turn the key of the A22TK to 
switch from [MAINTENANCE] 
mode to [RUN] mode after 
maintenance. 

(8) Exit

STOP

1.  Remove the key of the A22TK. 
2.  Exit with the key.

(9) Door locked

STOP

Close the door, and lock the D4SL-N.

(10) Mode change 

unlocked

STOP

1.  Confirm that the door is closed and locked (lock monitor of the D4SL-N), and 

then enable the A22LK to be unlocked.

2.  Unlock the A22LK.

(11) Mode changed

STOP

Insert the key into the A22LK, and turn the key of the A22LK to switch from 
[MAINTENANCE] mode to [RUN] mode.

(12) Operation restarted

STOP

RUN

Press the start button on the machine to restart operation. 

Safety Key
Selector Switch
A22TK

I take the key with me when 

I enter, so there is no worry 

of becoming trapped inside!

Guard Lock Safety 
Door Switch 
D4SL-N

(1) (2) (3) (4)
(9) (10) (11)

(5) (7) (8)

(6)

Maintenance is performed without stopping the facilities after the door switch is temporarily disabled. If the mode is 
changed to RUN mode while the door is open, the door switch will be enabled and the facilities will be stopped. 
Locking the A22LK-2RLA-

@

 in the MAINTENANCE position prevents the mode from being changed unintentionally.

Guard Lock Safety Key
Selector Switch
A22LK

(2) (9)

(5) (7) (8)

(3) (4) (10)

Key: Can be removed

RUN

MAINTENANCE

RUN

MAINTENANCE

Key: Cannot be removed

Key: Can be removed

RUN

MAINTENANCE

A22LK

Key: Cannot be removed

RUN

MAINTENANCE

Summary of Contents for A22LK Series











Reviews: