E-18
Conductive Level Controller
61F-GPN-BT/-BC
Precautions
General Precautions
Before using the Controller under conditions not described in the rel-
evant documents or applying the Controller to nuclear control sys-
tems, railroad systems, aviation systems, vehicles, combustion
systems, medical equipment, amusement machines, safety equip-
ment and other systems, machines, and equipment that may have a
serious influence on lives and property if used improperly, consult
your OMRON representative.
Make sure that the ratings and performance characteristics of the
Controller are sufficient for the systems, machines, and equipment
and be sure to provide the systems, machines, and equipment with
double safety-mechanisms.
Safety Precautions
In order to ensure safe operation, be sure to observe the following
points.
•
Use a power supply voltage within the specified range.
•
Do not use the Controller in locations subject to flammable gases
or objects.
•
Insert the Socket until it securely clicks into place.
•
Do not short the load connected to the output terminals.
•
Do not connect the power supply in reverse.
Correct Use
Mounting
Mount to a panel of thickness 1 to 5 mm.
Do not mount the Controller in the following places.
•
Locations subject to strong vibrations or shocks.
•
Locations outside the specified temperature and humidity ranges,
or locations prone to condensation. (The Controller detects high
impedances. Do not use in locations subject to high humidity lev-
els.)
•
Locations subject to dust.
•
Locations subject to corrosive gases (in particular, sulphurized gas
or ammonia gas).
•
Outdoors, or in locations subject to direct sunlight.
•
Near devices that generate strong, high-frequency noise (e.g.,
high-frequency welders, machines).
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. F053-E1-02