
E-16
Conductive Level Controller
61F-GPN-BT/-BC
Specifications
■
Ratings
Note: 1.
The 61F may not operate at resistance settings close to zero. Adjust the sensitivity to match actual usage conditions.
2.
The figure for wiring distance above is for when 600-V 3-core cabtyre cable with a cross-sectional area of 0.75 mm
2
is used.
■
Characteristics
Note:
The dielectric strength is measured between power terminals
and electrode terminals, power terminals and output terminals,
and between electrode terminals and output terminals.
Connections
■
Automatic Drainage Operation
Note:
The part within the dotted-line box is for the 61F-GPN-BC (relay-output type) only.
■
Automatic Water Supply Operation
Short terminals 7 and 8 for automatic water supply operation. (Operation shown in parentheses in the diagram above.)
61F-GPN-BT
61F-GPN-BC
Rated voltage
24 VDC
Allowable voltage range
85% to 110% of the rated voltage
Interelectrode voltage
5 VAC max.
Operation resistance (See note 1.)
Variable (0 to 100 k
Ω
)
Error
For scale of 0: +10 k
Ω
; For scale of 100:
±
10 k
Ω
Release resistance
200% max. of the operation resistance
Switching between supply and drainage
Terminals 7 and 8 open: Automatic drainage operation
Terminals 7 and 8 shorted: Automatic supply operation
Output specifications
Open collector (NPN)
30 VDC, 100 mA max.
SPST-NO
5 A, 240 VAC (Resistive load)
2 A, 240 VAC (Inductive load: cos
φ
=0.4)
Life expectancy
---
Electrical:
100,000 operations min.
Mechanical: 20,000,000 operations min.
Wiring distance (See note 2.)
100 m max.
Ambient operating temperature
−
10 to 55
°
C
Ambient operating humidity
25% to 85%
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Dielectric strength (See note.)
2,000 VAC, 50/60 Hz for
1 minute
Power consumption
2 W max.
Response time
Operating: 1.5 s max.
Releasing: 3.0 s max.
7
8
4
E
2
E
3
E
1
11
10
3
9
5
6
11
10
24 VDC
Recommended power supply; eg. OMRON S8VS
OUT+
OUT
−
OUT+
OUT
−
Pump ON (OFF)
Pump OFF (ON)
61F-GPN-BT
(See note.)
Open collector
output
Relay contact
output
Supply/
drainage
selection
terminals