Copyright © 2019 OMOROBOT Inc. All Rights Reserved.
8
2019 January 17
2019 January 17
Body rear side
2.2 HOW TO USE
2.2.1 POWDER ON AND OFF
Before turning on OMO R1, please make sure the charger is not connected
to the charging port.
Press the power button on the right side
of OMO R1 once.
● If the power is turned on, both the
power mark on the button and the battery
status LED will light up.
● Also, the front Logo light will be
turned on.
Power On and Off
If the front OMOROBOT Logo light is not
turned on, please check the connection
to the motherboard.
Shocking hazard
The charger port is always powered with
24V directly connected to the main
battery.
Please do not put any conductive
materials into the port as doing so may
cause damage to the robot and yourself.
