Omnitronic XKB 208A, User Manual

Page: 24 / 40

24
3
OPERATING DETERMINATIONS
The speaker systems of the XKB series are high-performance active speaker systems in light-weight and
rugged plastic cabinets. They can be flexibly used for permanent installations and professional live
applications. The 2-way speaker systems are designed as full-range bass-reflex systems with separate
power amplifiers for the high-frequency range and the low-frequency range featuring inputs for microphones
and line sources and parallel outputs for coupling with other active speakers. The DSP (digital signal
processor) features convenient application presets for quick sound contouring (models XKB-212A and XKB-
215). The built-in Bluetooth player allows for streaming music wirelessly from smartphones or tablets via
Bluetooth. The speakers systems are protected through limiters and extensive protective circuits. The
enclosure offers multiple setup options (use as a floor monitor, wall or stand mounting).
Power Supply
This product is allowed to be operated with an
alternating current of 230 V, 50 Hz and was designed
for indoor use only. The occupation of the connection
cables is as follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth has to be connected! If the device will be
directly connected with the local power supply network,
a disconnection switch with a minimum opening of 3
mm at every pole has to be included in the permanent
electrical installation. The device must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Device (RCD) with a maximum fault current of 30 mA.
Public and Industrial Use
Operating an amplification system in public or industrial
areas, a series of safety instructions have to be
followed that this manual can only give in part. The
operator must therefore inform himself on the current
safety instructions and consider them.
Maximum Power
The maximum power of the speaker system must never
be exceeded. When operating the speaker system,
please make sure that the loudspeakers always sound
well. When distortions can be heard, either the amplifier
or the loudspeaker is overloaded. Overloads can
quickly lead to amplifier or speaker damage. In order to
avoid damage, please reduce the volume immediately
when distortions can be heard. When speaker systems
are destroyed by overload, the guarantee becomes
void.
Installation
This speaker system must only be installed at a solid,
plane, anti-slip, vibration-free, oscillation-free and fire-
resistant location. Before installing the system, make
sure that the installation area can hold a minimum point
load of 5 times the system's load (e.g. weight 20 kg -
point load 100 kg). The speaker system must never be
installed higher than 100 cm without secondary
attachment. The speakers can be installed on top of a
subwoofer (satellite system). The carrying capacity of
the distance tube must never be exceeded. The
satellite system must always provide enough stability.
The subwoofer's base surface must always be
sufficiently dimensioned in relation to the top speaker in
order to prevent tilting over.
Serial Barcode
Never remove the serial barcode from the device as
this would make the guarantee void.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.
Approval
Bluetooth operation in the 2.4 GHz range and is
license-free and generally approved in EU and EFTA
countries.
EU Declaration of Conformity
Steinigke Showtechnic GmbH hereby declares that this
product XKB-208A/XKB-210A/XKB-212A/XKB-215A is
in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. The
complete Declaration of Conformity can be found at
www.steinigke.de
.