13106980_V_1_0.DOC
37/52
(28) MIC 3- SOCKET
Here, you can connect dynamic microphones via balanced or unbalanced jack plugs.
(29) MIC 3-CONTROL
With the MIC 3 control, you can adjust the volume of the cable microphone MIC 3.
(30) AUX IN
Here, you can connect the line-signals via balanced or unbalanced jack plugs.
(31) AUX IN-CONTROL
Used to set the level of the AUX IN input signal.
(32) LINE OUT
Output sockets for connecting further active systems.
(33) AUX OUT
Via the AUX OUT-sockets, you can either connect active speaker-systems or an additional amplifier for a
separate Control Room/monitor system.
(34) ECHO-CONTROL
With the Echo-control, you can activate the Echo-effect and adjust the desired repitition rate. Please
refer to the explanations under 7.10 Echo-effect.
4.5 CD-Player
Press the TAPE/CD-switch to start operation.
(35) CD SLOT IN
Insert the disc here. Please refer to the explanations under 7.2 CD Slot In.
(36) DISPLAY
LCD-display for displaying the different modes and functions. Please refer to the explanations under 7.3
LCD-Display.
When the device is on and the tray has no disc, "NO DISC" appears on the display. If the CD is
improperly positioned, "ERROR" appears on the display. If the CD is properly positioned, the player
jumps to the first track and automatically starts the music.
(37) PROGRAM-BUTTON
With the Program-button, up to 20 tracks can be programmed. Please refer to the explanations under 7.9
Programming.
(38) EJECT BUTTON
Via the EJECT-button, you can eject the CD. Please refer to the explanations under 7.14 End of
operation.
(39) SHUFFLE-BUTTON
If you press the SHUFFLE-button, the random-playback is activated (the display shows SHUFFLE). The
CD-players selects and plays the tracks randomly until you cancel the random-mode.
(40) REPEAT-BUTTON
For repeating the current track (Repeat 1) or the whole CD (Repeat All).
(41) STOP-BUTTON
Via the Stop-button, you can stop the CD.
