00053644.DOC, Version 1.0
11/15
2. SAFETY INSTRUCTIONS
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Maintenance and service operations are only to be carried out by authorized dealers. Damage caused by
manual modifications on this device is not subject to warranty. If the device is used for other purposes than
originally intended or if it is not correctly connected, the product may suffer damages and the guarantee
becomes void.
Protect the device against humidity and heat. The ambient temperature must always be between -5° C and
+45° C. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, have it
checked by a qualified service technician before you operate it again. Any damage caused by liquids having
entered the device is not subject to warranty!
For cleaning, only use a soft lint-free and moistened cloth. Make sure not to allow any water to enter and
never use any solvent cleansers.
2.1 Batteries
Batteries are hazardous waste which need to be disposed of appropriately. If the device is to be disposed,
the batteries have to be removed first. Make sure that the poles are correct when inserting the battery. Never
let batteries lying around openly as there is the danger that these can be swallowed by children or domestic
animals. Immediately consult a doctor when batteries are swallowed!
Leaking or damaged batteries can cause irritations when getting into contact with the skin. In this case use
appropriate protective gloves. Make sure that the batteries cannot be short-circuited, thrown into the fire and
be charged. There is a danger of explosion. Never spill any liquids on the device. Should any liquid enter the
device nevertheless, remove the batteries immediately. Please let the device be checked by a qualified
service technician before you operate it again. Any damages caused by liquids having entered the device
are not subject to warranty!
3. OPERATING DETERMINATIONS
The
TM-1000 MK2
is a PLL multifrequency pocket transmitter. The transmitter makes up a wireless
audio transmission system together with the multifrequency receiver
DR-1000 MK2
. Matching
microphones for connection to the pocket transmitter are available as accessories. The system operates in
the UHF range 740-764 MHz. The frequency range is divided into 192 channels, which can be selected as
desired with a 125 kHz frequency spacing. The system can be expanded to up to 16 wireless transmission
sets, which can be operated in parallel without any intermodulation. The transmission range is approx. 100 m
and depends on the local conditions.
The transmitter is only allowed to be operated with two 1.5 V mignon batteries (type AA) and was designed
for indoor use only. Never remove the serial barcode from the device as this would make the guarantee void.
3.1 Approval
This wireless microphone system was tested in accordance with the European standards EN 300422-2, EN
301489-01, EN 301489-09 and EN 60065. Consequently, this product adheres to the R&TTE directive of the
European Union and does not need an individual EC type examination of every member state. The notified
body is
1856
. The system falls into equipment Class 2.
In some countries, the operation of this wireless system needs to be approved by the national telecoms
regulatory authority. Contact the corresponding authority in your country for further information.
