00033100.DOC, Version 1.1
20/28
5. SETTING INTO OPERATION
1. Switch on the meter via the On/Off button.
2. An indication is displayed. If not, either connect an AC adapter to the 6V DC input socket or insert a
battery. If the display indicates the battery symbol, the battery is exhausted and must be replaced.
3. For mounting the
SLM-700
on a stand, the threaded jack (6.3 mm/1/4“) can be used.
4. Always switch off the unit after operation to extend battery life. If the device will not be used for a longer
period of time, remove the battery in order to avoid battery leakage.
5.1 Inserting/Replacing the battery
If the
SLM-700
is not used for a longer period (approx. 1-2 weeks), please remove the battery to prevent
damage in case of battery leakage.
■
Remove the compartment cover. When replacing a discharged battery, remove the old battery from the
battery compartment.
CAUTION!
Danger of explosion when battery is replaced improperly.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
■
Insert one 9 V block and make sure that the poles are correct.
■
Replace the compartment cover.
BATTERY DISPOSAL NOTICE
Please dispose of discharged batteries properly.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take discharged batteries to a collection center near you.
